The VF175 VMAX Super High Output four-stroke outboard is lighter, faster and smarter then any other outboard in its class. This exceptional piece of machinery has been purpose built to meet the needs of the high performance and competition market, and is ideally suited to smaller bass boats, flats boats, skit boats, bay boats and other performance hulls. This powerful 2.8 litre, 16-valve double-overhead cam engine utilises variable camshaft timing and electronic fuel injection, to deliver an exhilarating hole shot and top-end speed, while producing a incredibly efficient, clean and quiet performance. The VF175 VMAX comes with the option of a long and extra long shaft length and includes variable trollingto achieve that perfect lure presentation. For competition winning performance, don't go past the VF175 VMAX.
Features & Rigging Componentry
2800cc Four-Cylinder Engine
The 16 valve, 2.8 litre, double overhead camshaft (DOHC) layout with its increased cylinder capacity and large valves, results in optimum valve actuation, resulting in improved valve timing, acceleration and overall running performance.
Digital Network Gauges
This engine is compatible with Yamaha's Digital Network Gauges, including the top-of-the-line Command Link Plus system, giving you the information needed to maximise engine performance and efficiency. This engine is also NMEA2000 compatible with third party multi-function displays, GPS and fish finders.
The direct ignition system, with plug cap and ignition coil, provides higher reliability and increased performance.
Electronic Throttle Valve
The electronic throttle valve provides sure and more precise valve opening and closing according to each engine temperature and atmospheric condition. This system works in tune with the fuel injection and ignition systems, to deliver incredible response and exceptional fuel economy.
High Output Alternator
This alternator delivers more power: 50 amps at wide open throttle, producing a full 22 amps at only 600 rpm which means there is sufficient output to keep charging the battery even at low RPM.
The crankshaft design is offset 10mm from the centre of cylinder for more efficient transfer of power to the crankshaft.
Variable Camshaft Timing
The Variable Camshaft Timing (VCT) advances and retards the camshaft timing according to the engine RPMs. This in combination with the electronically controlled single throttle valve system and long intake manifold boosts low and mid-range torque for optimum acceleration.
Variable Trolling Control
Yamaha’s variable trolling control allows the skipper to precisely adjust the engine’s idling speed from 650 to 900 RPM in 50 RPM increments. The ability to finely tune the trolling speed allows fisherman to perfect their lure presentation when chasing different species of fish.
Remote Control Security System
Yamaha's optional Customer Outboard Protection (Y-COP) engine immobiliser system is easy to use and highly effective in stopping unauthorised start-ups when your boat is unattended. Simply push the button on the neat and simple remote to lock and unlock the engine.
Conventional - 6Y5 Round Gauge
Yamaha’s conventional digital multi-function gauges provide the real-time data required to maximise outboard performance and fuel efficiency. The two and three gauge illuminated display options provide rpm, trim, oil, speed, distance, time, overheating, battery, fuel economy/flow/consumption stats.
Command Link - 6Y8 Round Gauge
Using Local Area Network (LAN) technology, these digital round gauges provide accurate and real-time tachometer, speed and fuel management stats, including fuel flow/consumption/economy (up to two tanks), trim level, battery voltage, push button trolling speed adjustments and more.
Command Link - 6YC High Definition Gauge
This high definition, colour display uses Local Area Network (LAN) technology to deliver accurate and real-time stats for single and twin engine setups. The customisable day/night gauge delivers information on fuel flow/ economy/ consumption, trim level, battery charge, speed, push button trolling and more.
6x3 Concealed Side-Mounted Control
With its stylish chrome finish and ergonomic design, this mechanical control not only looks good, but provides effortless one-hand operation. The trim and tilt switch is comfortably located on the handle and features easily accessible neutral warm-up controls and externally adjustable throttle friction.
704 Premium Single Binnacle Control
This highly-polished, stylish looking, top mounted control allows for effortless one-handed control. The ergonomic design features a thumb operated trim and tilt switch built into the handle, as well as shift and throttle control functions, for convenient and comfortable operation.
Genuine Yamaha Propellers
Prop choice makes a huge difference to outboard acceleration, top-end speed, handling and fuel efficiency. That is why Yamaha continues to push the technological boundaries in the design and development of our leading range of high performance props - ensuring every Yamaha outboard performs at its peak.
Yamaha Shift Dampener System
Many of Yamaha's mid-range and high horsepower props come with Yamaha’s exclusive Shift Dampener System (SDS). This system absorbs forces created when an engine shifts in and out of gear, resulting in a quieter, smoother and ‘clunk free’ shifting.
Reliance SDS Series
This new line-up of polished stainless steel props are specifically designed for Yamaha's powerful inline four-cylinder engines. They include Yamaha’s Shift Dampener System (SDS) for quieter and smoother shifting, without the ‘clunk’ normally associated with shifting gear.
- Engine Type 4-Stroke, 16 Valve DOHC Direct Action In-line 4
- Bore x Stroke (mm) 96 x 96.2
- Fuel Tank Capacity (l)
- Displacement (cc) 2785.0
- Recommended Maximum RPM 5000-6000
- Fuel Management EFI
- Ignition TCI
- Lubrication System Wet-sump
- Alternator Output 12V - 50A with Rectifier Regulator
- Gear Ratio 1.86 : 1
- Starter System Electric
- Operation Method Mechanical control
- Trim and Tilt Method Power Trim & Tilt
- Digital Gauges Optional
- Command Link Gauges Optional
- Transom Height (mm [inch]) L: 516 [20.3] | X: 643 [25.3]
- Dry Weight (kg) L: 218 | X:222